ECS NEATSX User Manual page 66

Software Setup
If your system has a hard disk drive, put the NEATsx disk in drive A
and type:
COPY A:EMM.SYS C:
You can also copy the document files in the same way by sub­
stituting their file names for EMM.SYS.
2) To add the required line to the CONFIG.SYS file, type:
EDLIN CONFIG.SYS
*1
«CONTROL C»
*E
This will correctly modify the CONFIG.SYS file or will create
one with this line included, where necessary.
Your DOS User's Guide and User's Reference Manual also
contain information on this subject. Look in the appendices under
"How to Configure Your System" and "Installable Device Drivers"
for a more comprehensive explanation.
60
1 .DEVICE=EMM. S Y S/d