Advertisement
Si211307E
2. Procedure to Remove Electrical Parts and PCB
Procedure
Step
∗Remove the air filter according
to the procedures for removing
the air filter and suction grille.
1
After removing the
reinforce stay (1
installation screw),
loosen the 2 screws of
the control box cover and
remove the control box
cover.
2
Remove the 2 screws of
the control box.
Removal Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Procedure to Remove Electrical Parts and PCB
Reinforce stay
Points
3
Advertisement
