Canon i80 Series Quick Start Manual page 47

3
Start Print Head Cleaning.
(3) Select the ink nozzles to be cleaned, and then click O O K.
Important Do not perform any other operations until the print head cleaning
4
Print the nozzle check pattern to verify that the print head nozzles are clean.
When print head cleaning finishes, the confirmation message is displayed.
(1) Click O O K.
The nozzle check pattern will be printed.
(2) Examine the nozzle check pattern.
See "E E xamining the Nozzle Check Pattern" on page 40.
You can see a normal pattern and an irregular pattern in a color by clicking
Pattern Analysis.
(3) If the patterns are printed properly, click O O K to end the operation. If the patterns
are not printed properly, click C C leaning to start print head cleaning again.
Note
finishes. This takes about 60 seconds.
If the problem remains after performing print head cleaning three
times, try print head deep cleaning.
Printing Maintenance
(1)
Select C C leaning from the
pop-up menu.
(2)
Click C C leaning.
43