Print Head Cleaning
Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print
head consumes ink, so perform print head cleaning only when necessary.
Print head cleaning can also be performed from the printer itself. Ensure that
the printer is turned on. Hold down the R R ESUME/CANCEL button until the P P OWER
lamp flashes once.
Ensure that the printer is turned on.
Open the Printer Properties dialog box.
See "O O pening the Printer Properties Dialog Box Directly from the Start Menu" on
Start Print Head Cleaning.
(3) Select the ink nozzles to be cleaned, and then click E E xecute.
(4) When the confirmation message is displayed, click O O K.
Important Do not perform any other operations until the print head cleaning
finishes. This takes about 60 seconds.
Click C C leaning.