Canon i80 Series Quick Start Manual page 24

Color bubble jet printer
Hide thumbs Also See for i80 Series:
Table of Contents

Advertisement

Advanced Printing
About "Paper Size" and "Paper Type"
To change the paper size or paper type, operate the camera to select the PictBridge
print setup mode and confirm or change the settings.
By default, 4"×6" is selected in "Paper Size" and "Photo "(Photo Paper Plus Glossy)
is selected in "Paper Type" for this printer. To use Photo Paper Pro, select "Fast
Photo" in "Paper type".
If using a Canon PictBridge-compatible camera, you can select 5"×7" in "Paper
Size". The following sizes and types of paper can be loaded in the printer by
selecting options in "Paper Size" and "Paper Type".
"Paper Size" setting
4"×6" (Default)
8.5"×11" (Letter)
5"×7" *
* This size can be selected only for Canon PictBridge-compatible cameras. (Note
that it cannot be selected for some models.)
About "Layout" and "Trimming"
By default, "Borderless" is selected in "Layout" and "Off (No trimming)" is selected
in "Trimming" for this printer.
About "Image optimize"
By default, "On (Exif Print)" is selected for this printer.
About "Date print"
By default, "Off" is selected for this printer.
"Date Print" depends on the settings using the controls of the camera.
Note
20
Paper Type" setting
Photo (Default)
Fast Photo
Photo
Fast Photo
Photo
This printer can handle only Exif/JPEG image data to produce photos
using PictBridge.
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the digital camera and
printer, follow the instructions given in the Instruction Manual of
Camera.
Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
Paper loaded in printer
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Glossy

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8582a001 - i 80 color inkjet printer

Table of Contents