How To Manage Charts; How To Deactivate The C-Map Chart Function - Furuno FMD-3100 Operator's Manual

3.

HOW TO MANAGE CHARTS

This chapter mainly shows you how to install the public keys, licenses and charts,
manually update chart objects, and synchronize charts among ECDIS units. All chart-
related operations begin from the Chart maintenance mode, which you access by
clicking the [CHARTS] button on the Status bar.
Note 1: Charts, routes and user charts are shared with other FMD-3xx0, FCR-2xx9
and FAR-3x00 units, via LAN. Data is shared automatically; no operation is required.
Note 2: Chart processing (installation, deletion, etc.) may take several minutes de-
pending on the number of charts to be processed.
Note 3: If, when attempting to install charts, nothing appears on the display at the start
of the procedure, reset the power and try again.
Note 4: If installation of AVCS charts stops, the message "Chart installation has
stopped. Run the installation again. Installation will continue from the chart not yet in-
stalled." appears. This does not indicate completion of the installation. Restart the in-
stallation. The installation resumes from the chart not yet installed.
This message may also appear when installing CM-ENC, C-MAP Professional and
C-MAP Professional+ charts if the user does not confirm completion of the installation
within approx. one hour. (Installation window remains on the screen.) However, this is
not an indication of failed installation.
Note 5: When installing the AVCS LargeMedia, the message "No connection to don-
gle" may appear in the [Error/Warning Guidance] window at the completion of the in-
stallation. If this occurs, reinstall the media.
3.1

How to Deactivate the C-Map Chart Function

The C-Map chart function is active by default. If you do not carry C-Map charts, deac-
tivate this function as shown below.
Note: When the C-MAP function is disabled the following functions are not available.
• C-MAP selection on the Filter window (see section 3.16).
• C-MAP Install/Update History (see section 3.15).
1. Get into the Chart maintenance mode then click the [License] button on the
InstantAccess bar to show the [Licenses] dialog box.
2. Click the [C-MAP] tab to the show the [Licenses] dialog box for C-Map.
3. Uncheck [Enable C-Map].
3-1