Furuno FMD-3100 Operator's Manual page 323

No. Text
022 Fan3 No
Rotation
023 Fan4 No
Rotation
024 RS485 Communi-
cation Timeout
025 No Signal
026 Sentence Syntax
Error
027 Main Monitor COM
Timeout
028 Sub Monitor
COM Timeout
030 Sensor Adapter 1
COM Timeout
031 Sensor Adapter 2
COM Timeout
032 Sensor Adapter 3
COM Timeout
033 Sensor Adapter 4
COM Timeout
Default Meaning
Warning For MU-231: Connected to
COM2 (Sub Monitor).
Fan3 rotation speed is be-
low threshold.
Warning For MU-190: Connected to
COM2 (Sub Monitor).
Fan4 rotation speed is be-
low threshold.
Caution For MU-190/231: Connect-
ed to COM2. There has
been no communication
from processor unit through
RS485 for 180 seconds.
(No communication implies
incomplete sentence or
checksum error.)
Caution For MU-190/231: Connect-
ed to COM2. There has
been no signal continuously
for 60 seconds.
Caution For Sub monitor, connected
to COM2, value of external-
ly input sentence is out of
range defined by sentence.
Caution Communication with MU is
interrupted. 60 seconds tim-
eout.
Caution Communication with MU is
interrupted. 60 seconds tim-
eout.
Caution Communication error with
No.1 sensor adapter is de-
tected. 30 seconds timeout.
No.1 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.2 sensor adapter is de-
tected. 30 seconds timeout.
No.2 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.3 sensor adapter is de-
tected. 30 seconds timeout.
No.3 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.4 sensor adapter is de-
tected. 30 seconds timeout.
No.4 sensor adapter is
turned off, or there is a prob-
lem with network.
APPENDIX 4 ALERT LIST
Remedy
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence..
Check the connection of
brightness control cable.
Check the connection of
video cable.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
Check the connection with
the monitor.
Check the connection with
the monitor.
Check the connection with
No.1 sensor adapter and
network.
Check the connection with
No.2 sensor adapter and
network.
Check the connection with
No.3 sensor adapter and
network.
Check the connection with
No.4 sensor adapter and
network.
AP-21