Furuno FMD-3100 Operator's Manual page 354

FURUNO
2.8 Operation control
2.9 VLAN
2.10 Multiple VLAN
2.11 Cast control
3 RADAR OVERLAY (OPTION)
3.1 Picture color
3.2 Range
3.3 Display mode
3.4 Other functions
4 INTERFACE
4.1 Panel Computer Unit
Serial I/O
Data sentences (IEC61162-1/2)
Input
Output
DVI output
LAN
USB
4.2 Sensor adapter (option)
MC-3000S (serial)
MC-3020D (digital-in)
MC-3030D (digital-out)
4.3 Ethernet interface for IEC61162-450
Number of port
Panel computer unit
MC-3000S
Maximum data rate
Data sentences
Input
Output
IEC61162-450 transmission group
Input
Output
Multicast address
Destination port
Re-transmittable binary image transfer
PING, SNMPv1, v2c, v3
Port-base VLAN, IEEE802.1Q Tag VLAN supported,
VLAN ID：1 to 4094, VLAN registration：128 group
Communication between isolated ports is disabled
Broadcast, Multicast suppression
Radar picture: 256 colors
0.125 to 120 NM
Heading-up, North-up (heading data required)
Off-center, Echo trail, Interference rejection, Anchor watch
4 ports (IEC61162-1/2: 2 ports, IEC61162-1: 2 ports)
ABK, ALR, CUR, DBT, DPT, DTM, GGA, GLL, GNS, HDT, MTW,
MWV, NRX, OSD, RMC, ROT, RSA, RSD, THS, TTM, VBW, VDM,
VDO, VDR, VHW, VTG, XDR, ZDA
ABM, ACK, BBM, EVE, HTC, OSD, VBW, VSD, XTE
2 ports: DVI-D (DVI1), DVI-I or RGB (DVI2)
Note: Full HD monitor required
1 port: Ethernet, 1000Base-TX (for local communication)
4 ports (1 port for control unit), USB2.0 (type-A)
8 ports: I/O, IEC61162-1/2: 4 ports, IEC61162-1: 4 ports
8 ports: relay contact, logics set from program
8 ports: relay contact, normal open and normal close available
1 port (LAN2): 1000Base-TX, IPv4, 8P8C connector
1 port: 100Base-TX, IPv4, 8P8C connector
800 sps
ABK, ALR, CUR, DBT, DPT, DTM, GGA, GLL, GNS, HDT, MTW,
MWV, NRX, OSD, RMC, ROT, RSA, RSD, THS, TTM, VBW, VDM,
VDO, VDR, VHW, VTG, XDR, ZDA
ABM, ACK, BBM, EVE, HTC, OSD, VBW, VSD, XTE
MISC, SATD, NAVD, VDRD, RCOM, TIME, PROP, USR1 to USR8
Arbitrary (default: NAVD)
239.192.0.1 to 239.192.0.16
60001 to 60016
SP - 2
FMD-3100
E4484S01F