Canon PIXMA MP510 Quick Start Manual page 88

Maintaining the Do not attempt to disassemble or modify the machine. There are no user serviceable parts inside
machine the machine.
The machine contains high-voltage components. Never attempt any maintenance procedure not
described in this guide.
Working around the Do not use highly flammable sprays near the machine.
machine
This could cause a fire or electric shock if the spray comes into contact with electrical components
inside the machine.
Caution
You may cause injury or damage the machine if you ignore any of these safety precautions.
Choosing a location Do not install the machine in a location that is unstable or subject to excessive vibration.
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, install the machine in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.
Power supply Ensure that the area around the power outlet is kept clear at
all times so you can easily unplug the power cord if
necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
Never use a power supply source other than the one rated for the machine in the country of where
you purchased the machine.
AC 100-240 V, 50/60 Hz
84 Safety Precautions