Printing Does Not Start - Canon PIXMA MP510 Quick Start Manual

Photo all-in-one printer
Hide thumbs Also See for PIXMA MP510:
Table of Contents

Advertisement

Printing Does Not Start

Cause
The machine is not powered on./The
power cord is not connected.
Ink tank is empty.
Ink tank not installed in proper position. Open the Scanning Unit (Printer Cover) and check the ink lamps.
Ink tank is not installed securely. / Part
of the orange tape is remaining.
Make sure that the power cord is securely plugged into the Power Connector of
the machine.
Plug the power cord all the way in, since it may be difficult to plug.
Open the Scanning Unit (Printer Cover) and check the ink lamps.
If an ink lamp is flashing red at about 1-second intervals, the tank is empty.
Replace the ink tank, and close the Scanning Unit (Printer Cover). See
"Replacing an Ink Tank" on page 34.
If you want to continue printing, confirm the message displayed on the LCD and
take the appropriate action. See "Error Message Is Displayed on the LCD" on
page 57.
Note
If multiple ink lamps are flashing, check how fast they are flashing.
Fast flashing (at about 1-second intervals) indicates the tank is empty. Slow
flashing (at about 3-second intervals) indicates ink is low. For details on different
flashing speeds, see "Getting the Ink Level Information" on page 34.
If there is still sufficient ink but its ink lamp is flashing red, an ink tank may be
installed in a wrong position.
Confirm that the ink tanks are installed in the appropriate positions. See
"Replacing an Ink Tank" on page 34.
Open the Scanning Unit (Printer Cover) and check the ink lamps.
If the ink lamp is not lit, press the
place. The ink lamp lights up red when the ink tank is fully inserted.
Make sure all of the orange tape is peeled off the ink tank and the air hole is
completely exposed, as illustrated in (A). If any orange parts are left as in (B),
remove all of the orange parts.
(A) Correct
L-shaped air hole
(B) Incorrect
Part of the orange tape is remaining. Peel off the tape completely along the
perforation.
Action
mark on the ink tank until it clicks into
(A)
Troubleshooting
(B)
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1450b002 - pixma mp510 all-in-one photo printer

Table of Contents