Cannot Install The Mp Drivers - Canon PIXMA MP510 Quick Start Manual

Cannot Install the MP Drivers

Cause
Unable to proceed beyond the Printer
Connection screen.
Installation does not start automatically
when the Setup CD-ROM is inserted
into your computer's disc drive.
Installation procedure not followed
correctly.
60 Troubleshooting
If you were unable to proceed beyond the Printer Connection screen, follow the
procedure below to reinstall the MP Drivers.
(1)Click Cancel on the Printer Connection screen.
(2)Click Start Over on the Installation Failure screen.
(3)Click Back on the screen that appears next.
(4)Click Exit on the Welcome screen, then remove the CD-ROM.
(5)Turn the machine off.
(6)Restart the computer.
(7)Make sure you have no application software running, including anti-virus
software.
(8)Follow the procedure described in the Easy Setup Instructions to reinstall the
MP Drivers.
Click Start > My Computer > double-click the CD-ROM icon.
In non-XP Windows, open the My Computer window and then double-click the
CD-ROM icon.
Note
To use the Run command to start the setup program, specify your disc drive and
then the name of the setup program, Msetup4.exe. The drive letter of the disc
drive depends on your computer.
Double-click the CD-ROM icon on your desktop to start installation.
If the CD-ROM icon is not displayed on the desktop, there may be a problem
with the CD-ROM. Contact a Canon service representative.
Follow the procedure described in the Easy Setup Instructions for proper
installation.
If the drivers were not installed correctly, uninstall the MP Drivers, restart your
computer, and then reinstall the drivers. Refer to the Printer Driver Guide on-
screen manual.
Note
If the installer was forced to be terminated due to an Windows error, the system
may be in an unstable condition and you may not be able to install the drivers.
Restart your computer before reinstalling.
Action