Using Specialty Media - Canon PIXMA MP510 Quick Start Manual

Photo all-in-one printer

Hide thumbs Also See for PIXMA MP510:

Quick start manual (91 pages)

Service manual (68 pages)

Setup instructions (2 pages)

Table of Contents

Postcards affixed with photos or stickers

Envelopes with double flaps

Envelopes with sticker flaps

Envelopes with an embossed or treated surface

Any type of paper with holes

Paper that is not rectangular

Paper bound with staples or glue

Paper with adhesives

Paper decorated with glitter, etc.

Photo Paper Pro Guidelines

Do not touch the print surface until the ink is dry (approximately 30 minutes). Colors in dark

images may appear indistinct at first, but will become clearer after approximately 30 minutes.

Images may become smudged if you place printouts in an album before the ink is completely

dry. We recommend to allow the ink to dry for 24 hours before placing your printouts in an

album.

Do not attempt to dry the ink with a hair dryer or by exposing printouts to direct sunlight.

Do not store or display printouts in hot or humid conditions. Never expose them to heat or

direct sunlight.

Store printouts in photo albums, photo frames, or presentation binders to protect them from

direct exposure to air or sunlight.

Do not mount printouts in an adhesive-type album as you may not be able to remove them.

Note that some types of clear plastic folders and albums may cause the edges of the paper to

turn yellow.