Before Installation; Connecting The Water Line To The Refrigerator; Connecting The Water Line To The Water Supply - Viking Range 3 Series Manual

Installation

Before Installation

Make sure that you have everything necessary to ensure proper
installation before proceeding, including:
Your product comes with an internal water filter for use inside
the refrigerator. Part number of the filter is RWFRVFFR and
you can use this part number when ordering replacement
filters.
Connecting the water line
to the refrigerator
1. Remove the valve channel cover (A) from the water inlet valve.
2. Slip the union (C) water inlet valve (B).
3. Push the water hose downwards firmly to slip it onto the water
inlet valve (B).
4. Tighten the union (C) by hand to secure it onto the water inlet
valve.
Normally, you are not required to tighten the union
with a tool. However, you can use a pliers or pliers
to tighten the union if there is a leak. DO NOT
overtighten
Connecting the water line
to the water supply
Connect the water line to a water supply valve. If a valve is not
present or you are not sure, consult a qualified plumber.
8 EN
Refrigerator / User Manual