Advertisement
Mono Riser cutting
●
The 2nd mono riser cut should be done perpendicular to the steerer axis, and is best done using a Park Tool
SG 7.2 saw guide where possible
●
The edges should be lightly filed for a smooth chamfer
Reinstall your universal adapter just above the cut line, allowing the Di2 wire to enter the mono riser
●
●
Install the top plate/cover for the universal adapter, at this point you can also install the cover on the
basebar.
●
All bolts should be lightly greased
Universal Adapter Torque: 3Nm
●
●
Basebar cover Torque: 1Nm
(4Nm)
(hand-tight)
Advertisement
