CAMDEN CX-DE1200 Installation Instructions Manual page 5

Step 5: Slot in the electromagnet lock unit through the shoulder screw into the EZ mounting plate as shown in Figure 1-2 below.
CAUTION: The lock unit must be held in place until secured with fixing screws.
Door Frame
Door
LOCK
Out Swing
Mounting Plate Assembly
Step 6: Align the lock unit with the mounting plate. Fix the lock unit to the mounting plate with the allen key given
through fixing the screw. Carefully screw into the mounting plate to avoid stripping the threads. Check and confirm
the alignment and mating surface between the armature plate and lock unit.
NOTICE: Loosen screw #1 or #2 to re-align the mounting plate and position the lock unit mating surface to fully attach with
the armature plate. Re-tighten screw #1, #2 and screw-in the balance screw holes of mounting plate and armature housing.
Door
Out Swing
Step 7: Pull the wires through the door frame, mounting plate and into the electromagnetic lock unit casing.
Fix the electromagnet lock unit to the mounting plate with the fixing screw. Make sure to fully tighten the fixing screw
with the proper tool (eg. "T" Handle Allen Key).
Door
Shoulder Screw
1
Out Swing
Figure: 1
EZ Mount Interlock
Door Frame
LOCK
Door Frame
Door
LOCK
CX-DE1200 Delayed Egress Electro Magnetic Lock
Door Frame
2
LOCK
Figure: 2
Fixing Screw
Door
Fixing Screw
INSTAL LATION INS T RUCT IONS
Door Frame
Door
Out Swing
Door Frame
Mount with self
tapping screw
permanently
(Allen Key included)
LOCK
Figure: 3
Page 5 of 9