Pedestrian - EverFocus H265 Series User Manual

Value IPCam-SG Series – H265, 2MP / 5MP / 8MP

3.5.1.2 Pedestrian

On this page, you can set up Pedestrian functions. When camera detects faces of humans, vehicle,
pedestrian and vehicle, the Pedestrian event will be triggered. You can configure some event
actions like event recording, Email alert or pop-up full screen when an event is triggered.
[Pedestrian Settings] : You can configure the pedestrian detection settings here.
Enable: Select to enable or disable pedestrian detection.
Dynamic Marking: Select to choose to show or not show the track.
Face Enhance: Turn on to enhance the effect of the pedestrian image captured by the moving target, so
as to make it clearer. However, enable this function will take up more resources of IPC, making the
overall effect of the screen worse.
Snapshot Mode: Choose a Snapshot Mode.
Apply Mode: Choose an Apply Mode.
Min Pixel: The lowest pixel setting of human and object. When the recognized object is smaller than the
pixel, no alarm is generated accordingly. It can be set to 64-1080. You can use the Pixel Counter function
in the Live View Window to measure the pixel size of the human or object you want to detect.
Max Pixel: The highest pixel setting for human and object. When the recognized object is larger than the
pixel, no alarm will be generated accordingly. It can be set to 32-1080. Note: You can use the Pixel
Counter function in the Live View Window to measure the pixel size of the human or object you want to
detect.
Detection Mode: Choose a Detection Mode.
Rule Kind: Choose a Rule Kind.
Detection Range: Select a Detection Range.
Click Refresh to refresh the page; click Save to save the settings.
27