Record; Stream - EverFocus H265 Series User Manual

Value ip network camera

Hide thumbs Also See for H265 Series:

Table of Contents

Value IPCam-SG Series – H265, 2MP / 5MP / 8MP

3.3

Record

3.3.1

You can configure the below configurations to Main Stream, Sub Stream and Mobile Stream.

Enable: This button is only for Mobile Stream. Switch the button to the right to enable the function.

Resolution: Select a resolution.

FPS: Select a frame rate per second for the selected stream type.

Video Encode Type: Select a video codec.

Video Code Level: Select Main Profile for the video codec.

Bitrate Control: Select CBR (constant bitrate) if the scene is simple and less changing, such as a gray wall.

Select VBR : (variable bitrate) if the scene is complex, such as a department store. If VBR is selected, select

a video quality from the drop-down list.

Bitrate Mode: Select User-defined to set up bitrate manually; or Pre-defined to auto-select bitrate.

Bitrate: The Bitrate corresponds to the speed of data transfer that the IP Camera will use to record video.

Recordings that are encoded at higher bitrates, will be of better quality.

Audio: Switch the button to the right to enable the audio function.

I-Frame Interval: Set up an I-Frame interval.

Click Refresh to refresh the page; click Apply to save the settings.

Table of Contents