User Account - EverFocus H265 Series User Manual

3.8.2 User Account

You can configure the user account settings on this page. Up to 7 user accounts (1 administrator
and 6 users) can be configured.
1. You can configure the user name/password in editing window.
2. Switch Enable button to the right to enable the user account.
3. Input the user name with alphabetic or numeric characters; and the passwords have to be numeric
(0-9) and at least 5 characters.
4. Click Ok to save the settings.
5. After enabled the password, you can further set up the advanced function in the Policy field. The
Administrator account has full privileges so the functions cannot be configured. In the user Policy
window, check the boxes to grant functions for the selected user account.
Note: The Administrator account has full privileges so the functions cannot be configured.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
72