Alarm; Motion - EverFocus H265 Series User Manual

3.4.2

Alarm

3.4.2.1 Motion

You can configure the Motion alarm settings here:
Alarm Output: After enabling the Alarm, select a timeout duration for the alarm output.
Post Recording: Select a post recording time when a motion event is triggered.
Send Email: Switch the button to the right to enable the Email alert function. When a motion event is
triggered, the camera will send an email alert with a snapshot image to the pre-configured Email receiver.
Note that for this function to work, you have to set up the Email function in advance.
FTP Pic. Upload: When an event is triggered, the system will upload alarm images to FTP server. Note
that for this function to work, you have to set up FTP configurations in advance.
Picture to Cloud: When a motion event is triggered, the system will upload alarm images to Cloud
(Dropbox). Note that for this function to work, you have to set up Cloud storage in advance. Please refer
to 3.7.3 Cloud Storage.
Alarm Out: Select to enable the Alarm Out.
Enable Recording: Switch the button to the right to enable the motion recording function. To further
configure recording schedule, click the Schedule button to set up record schedule.
Move your mouse cursor over the schedule time blocks. Click and drag on the schedule time blocks to
draw the blocks with orange color, which will be applied with motion recording function.
Click Refresh to refresh the page; click Save to save the settings.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
21