Installing The Securing Braces; Power - Canon imageFORMULA DR-7090C User Manual

CAUTION
• If you turn the scanner ON without removing the transportation
screws, error code E2020001 appears. Turn the power OFF, and
remove the transportation screws and tag.
• As the transportation screws are necessary when transporting the
scanner, do not throw them away. Make sure to store them for
later use.

Installing the Securing Braces

The securing braces prevent the scanner from tipping
backward when the feeder is open. Make sure to install the
securing braces before using the scanner.
Securing braces
Chapter 1 Before You Start Using the Scanner

Power

● Connect only to a power outlet of the rated voltage
and power supply frequency (either 120 V, 60 Hz
or 220-240 V, 50/60 Hz, depending on your
region).
● Do not use the scanner with a power supply that is
not rated for the specified voltage. Doing so might
cause fire or electric shock.
● Do not connect other electrical equipment to the
same power outlet to which the scanner is
connected. Also, when using an extension cord,
make sure that the extension cord is rated for the
current requirements of the scanner.
● The power cord may become damaged if it is often
stepped on or if heavy objects are placed on it.
Continued use of a damaged power cord can lead
to an accident, such as a fire or electrical shock.
● Never bundle the power cord or wrap the cord
around an object, such as a table leg.
● Do not pull directly on the power cord. When
disconnecting the power cord, grasp the plug and
remove it from the outlet.
● Keep the area around the power plug clear of
objects so that the power cord can be
disconnected easily in an emergency.
● If you have any questions regarding the power
supply, contact your local authorized Canon dealer
or service representative for further information.
1-3