Changing The Stamp Cartridge - Canon imageFORMULA DR-7090C User Manual

1.

Changing the Stamp Cartridge

When using the optional stamp unit
the stamp cartridge whenever the stamp mark becomes smudged or faint. Contact your sales reprentative or service representative
to purchase a new stamp cartridge.
1.
Open the feeder cover.
Operate the opening lever, and then slowly raise the cover
until it stops.
2.
Open the feeder guide, and then open the inner
cover.
The feeder guide has a green tab, while the inner cover
located under the feeder guide has a light blue tab.
Inner Cover Stamp Cartridge
Feeder Guide
(see p. 1-14) to stamp scanned documents, you should use the following procedure to replace
5-2
3.
Use a pair of tweezers or some similar tool to remove
the old stamp cartridge.
4.
Insert a new stamp cartridge.
IMPORTANT
• When installing the stamp cartridge, make sure that the stamp
does not protrude outside the hole.
• Improperly installing the stamp cartridge can cause paper
jams.
Chapter 5 Maintenance