Introduction - ICT PRT-ADC4-DIN Installation Manual

Introduction

The Protege DIN Rail 4 Channel Analog Input Expander extends the Protege system by providing 4 highly
configurable industrial sensor analog inputs which allow the interface of any 0-10V sensor devices and self-
powered 4-20mA current loop sensors.
Flexible module network architecture allows large numbers of modules to be connected to the RS-485 module
network. Up to 250 modules can be connected to the Protege system in any combination to the network, over a
distance of up to 900M (3000ft). Further span can be achieved with the use of a network repeater module.
The current features of the analog expander include:
⦁ 4 independent analog input channels
- High resolution 10 bit input with 5 x oversampling
- Programmable channel deviation trigger level
Individual channel restore options
⦁
12VDC pass-through and 24VDC internally generated supply outputs for sensors
⦁
Industry standard DIN rail mounting
⦁
Online and remote upgradeable firmware
⦁
Secure encrypted RS-485 module communications
⦁
PRT-ADC4-DIN | Protege DIN Rail 4 Channel Analog Input Expander | Installation Manual 4