Watts Lync DigiTemp Jr V23 User Manual/Instruction Manual page 10

Set up and Programming
To set mixed setback offset (to set temperature lower during unoccupied period) press word mixed setback
offset from the system setup menu and press off and ACCEPT.
To set Mixed Setback Offset press On and ACCEPT. Temperature can be changed by SLIDER icon or by
touching the UP or DOWN arrows.
To change high temperature alert differential, press word high temp. alert diff. from the system setup
menu. High temperature alert differential can be changed by SLIDER icon or by UP or DOWN arrows and
then pressing ACCEPT.
14
Set up and Programming
To change low temperature alert differential, press word low temp. alert diff. from the system setup menu.
Low temperature alert differential can be changed by SLIDER icon or by UP or DOWN arrows and then
pressing ACCEPT.
!
If you are finished at this time, the system will return to a locked
state if not touched for 70 seconds.
Or, touch the BACK icon twice to return to the "Programming" menu, then press LOCK
When the system is locked, the "Programming" menu will now display the UNLOCK icon, as shown below:
15