L) Pointing The Sensor To The South; M) Moon Phase - Renkforce 2377869 Operating Instructions Manual

l) Pointing the sensor to the South

The outdoor sensor is calibrated to be pointing to North by default. However, in some cases, users may wish to
install the sensor pointing to the South, especially for people living in the Southern hemisphere (e.g., Australia, New
Zealand).
1. First install the outdoor sensor with the arrow point-
ing to the South.
2. Press and hold the
until the upper part of the compass begins flashing.
3. Press the or buttons so that the lower part of the
compass begins flashing.
4. Press the button (Wind) to confirm.
Changing hemisphere setting will automatically switch the direction of the moon phase on the display.

m) Moon phase

In the Northern hemisphere, the moon waxes (the part of the moon we see that glows after the New Moon) from the
right. Hence the sun-lit area of the moon moves from right to left in the Northern Hemisphere, while in the Southern
Hemisphere, it moves from left to right. The table below illustrates how the moon will appear on the weather station.
Northern hemisphere
58
button (Wind) for 8 seconds
Moon phase
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning Crescent
Northern hemisphere
Southern hemisphere
Southern hemisphere