B) Outdoor Sensor - Renkforce 2377869 Operating Instructions Manual

b) Outdoor sensor

Assemble the stand and pole
1
Step 1
Insert the top part of the mounting pole into the square
hole of the outdoor sensor.
Align the indicators on the pole and the sensor.
Step 3
Insert the other end of the pole into the square hole of
the plastic base.
Align the indicators on the pole and the base.
Step 2
Place the nut in the hexagonal hole on the sensor, then
insert the screw from the other side and tighten it.
Step 4
Place the nut in the hexagonal hole of the base, then
insert the screw from the other side and tighten it.
45