Using The Scanner Buttons - Canon CanoScan D1250U2F Quick Start Manual

Using the Scanner Buttons

You can use the three convenient buttons on the front of the scanner to scan and perform related
tasks easily with a single touch of the button. Place an item on the scanner before pressing a button.
• To use these buttons, ScanGear CS-U, ScanGear Toolbox and ArcSoft PhotoBase should
be installed from the CanoScan Setup Utility CD-ROM.
SCAN Button
To open the scanned image in the
PhotoBase window
1. Press the [SCAN] button.
2. The scanner will scan the item.
3. The scanned image will appear in the
PhotoBase window.
COPY Button
To print (copy) the scanned image with a
printer
1. Press the [COPY] button.
2. The scanner will scan the item.
3. The scanned image will print.
• The printer driver should be installed and the
printer should be on-line to use this function.
• While scanning, you can change the default settings for scanning by clicking the
[Cancel] button. For details on changing settings or arranging the scanner's button-to-
function assignment, refer to the ScanGear Toolbox User's Guide (electronic manual).
14
D1250U2F Quick Start Guide
*D1250U2F_QSG_E 14
E-MAIL Button
To e-mail the scanned image as an
attached file
1. Press the [E-MAIL] button.
2. The scanner will scan the item.
3. The [E-mail software selection] dialog
will appear. Select an option from the
list and click [OK].
• This step is required only for the first scan.
4. The e-mail software will start, and
the scanned image will be attached in
a new message window.
5. Enter the receiver's address and title,
write a message, confirm the required
settings, and send the message.
• MAPI compliant e-mail software, such as
Outlook Express, Microsoft Outlook,
Eudora or Netscape Messenger should be
installed and enabled. With certain e-mail
software, you should set the MAPI
function on.
11/24/01, 7:19 AM