Install the Software
Install the Scanner Driver
Install the scanner driver (ScanGear CS-U) with the following procedure.
Windows XP Professional / Home Edition users
Windows Millennium Edition (Me) users
Windows 98 / Windows 2000 Professional users
• With Windows XP and Windows 2000, you should log on with a user name set to an
administrator when you install or uninstall software programs.
Windows XP Professional / Home Edition
Turn the computer on.
"Welcome to the Found New Hardware Wizard"
Confirm that "Install the software automatically
(Recommended)" is selected.
Place the CanoScan Setup Utility CD-ROM in the
The driver will begin to install.
When "Completing the Found New Hardware
Wizard" appears, click [Finish].
Continue on P. 10.
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS-U and ScanGear Toolbox using the "Uninstall the Software" menu of the
CanoScan Setup Utility CD-ROM. If you upgrade to Windows XP with the software
remaining, the scanner may not work. For details, please read the Troubleshooting
section on the CanoScan Setup Utility CD-ROM.
Read this page.
Go to P. 8.
Go to P. 9.
D1250U2F Quick Start Guide
11/24/01, 7:18 AM