How to Scan Film
Start one of the bundled application programs and start ScanGear CS-U from within it
(see P. 19).
In the [Image Source] category, select [Film].
In the [Film Type] category, select color or black and white, and negative or positive.
Click the [Preview] button.
Select the Image Type or adjust color balance as
required. Higher than 600 dpi of resolution is
recommended when scanning film.
Select the scan area (see P. 13).
• When scanning mounted film, stripes may appear at the upper or lower of the scanned
image. In this case, make sure to select the scan area avoiding stripes.
Click the [Scan] button.
After closing ScanGear CS-U, edit, save or print the image using the application program.
D1250U2F Quick Start Guide
11/24/01, 7:19 AM