Canon CanoScan D1250U2F Quick Start Manual page 11

Windows 98 / Windows 2000 Professional
The screen shots in this section are from Windows 98.
1.
Turn the computer on.
2.
When the [Add New Hardware Wizard] dialog box
appears, click [Next].
3.
Confirm that "Search for the best driver for your
device. (Recommended)" is selected and click
[Next].
4.
Place the CanoScan Setup Utility CD-ROM in the
drive.
5.
Confirm that "CD-ROM drive" is selected, wait for
10 seconds, and then click [Next].
If "Driver Not Found" appears, click [Back] and repeat
this step.
6.
When "CanoScan D1250U2/D1250U2F" appears,
click [Next].
The driver will begin to install.
Windows 98 Users
If prompted to insert the Windows 98 CD-ROM, follow
the instructions below.
a. Click [OK] to the dialog message.
b. Click [Browse].
c. Select the CD-ROM drive and click [OK].
d. Click [OK].
7.
Click [Finish].
*D1250U2F_QSG_E 9
Install the Software
D1250U2F Quick Start Guide
11/24/01, 7:19 AM
9