Download  Print this page

Canon CanoScan D1250U2F Quick Start Manual page 20

Color image scanner
Hide thumbs

Advertisement

Table of Contents
Using the PHOTO Button
PHOTO button equipped on the document cover is convenient to
scan a film and print the image to the printer. When you push
this button, the film is scanned and the image will be sent to the
photo printing program "PhotoRecord". You can easily print the
image with this software.
1.
Place the loaded film guide on the scanner and
push the PHOTO button.
2.
Scanning automatically starts.
3.
When scanning completes, [PhotoRecord Print
Modes] wizard starts.
Select Print Mode, Paper Size and so on in the dialogs.
4.
The PhotoRecord window opens in which the
scanned image appears.
5.
Make the printer ready and click the [PRINT] button.
6.
In the print dialog, confirm the print settings and
click [Print].
• With some models of Canon Bubble Jet printer, you can perform perforated paper
printing.
When you want to scan photos (not films) from the PHOTO button, change the settings of ScanGear Toolbox.
1.
Start ScanGear Toolbox. (see P.21)
2.
Click [Photo] button on the Toolbox toolbar.
3.
Select [Color Photo], [Color (Auto crop)] or other
photo option in the [Original] item.
4.
Click [Apply] and close ScanGear Toolbox.
The steps of scanning are the same as above.
• The settings of ScanGear Toolbox are available until they are changed.
• Make sure to attach the protective sheet on the scanner document cover, when you
scan photos or documents.
18
D1250U2F Quick Start Guide
*D1250U2F_QSG_E
18
11/24/01, 7:19 AM

Advertisement

Table of Contents
loading

  Related Manuals for Canon CanoScan D1250U2F