Registering And Editing A Coded Dial Code Via The Remote Ui - Canon imageCLASS MF4450 Basic Operation Manual

Registering and Editing a coded Dial Code
via the Remote UI (MF4570dn Only)
1
Start the web browser.
2
Enter "http://<the IP address of the machine>/" in
the address field, and then press the [ENTER] key
on your keyboard.
Input Example: "http://192.168.0.215/"
3
Log on to the Remote UI.
(1) Select [System Manager Mode].
(2) Enter [System Manager PIN].
(3) Click [OK].
(1)
(1)
4
Click [Address] → [Coded Dial].
(1)
(2)
● Storing a coded dial code newly
Proceed to Step 5.
5-8
● Editing a coded dial code
(1) Click the number or name.
(2) Click [Edit].
(3) Specify the required settings in the edit screen for
destinations, and then click [OK].
● Deleting a coded dial code
(1) Select the check box for which you want to delete the
number, and then click [Delete].
5
Click [Not Registered] or the number which is not
registered.
6
Select [Fax] from the drop-down list.
(2)
(3)
7
Specify the required settings, and then click [OK].
(2)
(1)