Print Result Is Not Good; Paper Curls - Canon imageCLASS MF4450 Basic Operation Manual

Print Result Is Not Good

NOTE
Contacting your local authorized Canon dealer
If a problem that is not indicated in the e-Manual occurs, if none of the suggested measures solve the problem, or if you cannot determine the
problem, contact your local authorized Canon dealer.

Paper Curls

Perform one of the following solutions according to the cause.
<Cause 1> Damp paper is used.
Replace the paper with new paper in an unopened package.
Solution 1
"Paper Requirements" (→P.2-6)
Perform the following procedure in the printer driver when you are using plainpaper (60 to 90 g/m2).
Solution 2
1. Display the [Page Setup] tab.
2. Set [Paper Type] to [Plain Paper L].
Change the <Special Mode V> settings from the operation panel.
e-Manual → Maintenance → Special Mode
The level of improvement according to the setting option is as following.
<Off> → <Mode 1> → <Mode 2> → <Mode 3>
(low)
Solution 3
* Change of paper type or environment may reduce the curl or wrinkle problem, even without changing the setting.
* This setting is available when
• the <Paper Size> is set to <B5>, <A5>, <STMT>, or <EXEC>
• the <Paper Type> is set to <Plain (16 lb Bond-24 lb Bond)>, <Plain L (16 lb Bond-24 lb Bond)>, <Recycled>,
<Color>, <Rough 1 (16 lb Bond-24 lb Bond)>, or <Envelope>
* As you select an option that has higer effect, printing speed becomes slower.
<Cause 2> Appropriate paper is not being used.
Replace the paper with which can be used with this printer.
Solution
"Paper Requirements" (→P.2-6)
(high)
9-13