Specifying Values Using The Navigation Keys; Returning To The Default Screen - Canon imageCLASS MF4450 Basic Operation Manual

Specifying values using the navigation keys

Specifying values
Situation
When moving through the bars to
adjust levels such as density
When selecting a value to set a
timer
When entering a series of numbers
or letters such as PIN
Confirming the input
To confirm the input:
• Press [OK].
• When <Apply> appears on the display, press [

Returning to the Default Screen

From the menu screen, press [
menu screen and return to the default screen.
1-8
Screen example
Correct Density
- +
Numeric key icon
Auto Reset Timer
2 minutes
(0=Off, 1-9)
System Manager PIN
*******
<Apply>
1 2 3 4 5 6 7 8 9 0
<BS>
] or [ ] to select <Apply>, and then press [OK].
NOTE
] (Menu) to exit the
If you press [
Procedure
Press [ ] or [ ] to adjust the level.
Press [ ] or [ ] to specify the value.
NOTE
Available values
You can specify any value shown in the parentheses at
the bottom of the screen.
When the numeric key icon is displayed on the
screen
You can also enter values with the numeric keys.
"Text Input Method" (→P.1-9)
Press [ ], [ ], [ ], or [ ] to select a number or
character, and then press [OK] to enter the number or
character.
To clear a number or character, select <BS>, and then press
[OK].
NOTE
You can also use the numeric keys
You can also enter values with the numeric keys.
"Text Input Method" (→P.1-9)
] (Menu) before you press [OK]
The specified settings will not be saved.