Specifying Destinations; Specifying Destinations By Entering A Fax Number; Specifying Destinations With The One-Touch Keys; Specifying Destinations Using Coded Dialing - Canon imageCLASS MF4450 Basic Operation Manual

Specifying Destinations

Specifying Destinations

Specifying Destinations by Entering a Fax Number

Specifying Destinations with the One-Touch Keys

Specifying Destinations Using Coded Dialing

Fax mode screen
Specify destination.
01/01/2011 12:52AM
Sharpness: 0
Specify Destination
Press [ ] or [
Destination>.
Setting screen
Specify Destination
Fax (New)
Address Book
Coded Dial
Press [
] or [
Dial>.
6-4
+ -
] to select <Specify
] to select <Coded
Specify the fax number with the numeric keys, [
and [ ] (SYMBOLS).
Correcting destinations
• To cancel a destination
Press and hold [ ] (Clear).
• To delete the last character of a destination
Press [ ] (Clear).
Press the one-touch key (01 to 04) of the destination.
To use this feature, you need to pre-register destinations in one-touch keys.
"Registering and Editing One-Touch Keys" (→P.5-3)
If you press an incorrect key
(1) Press [ ] (Clear).
(2) Press [ ] to select <Yes>, and then press [OK].
* If you want to repeat the procedure from specifying the settings for the
document scanning, press [
Enter coded dial no.
*
*001
Enter the three-digit registration number (001 to 100) with
the numeric keys.
To use this feature, you need to pre-register destinations in
coded dials.
"Registering and Editing One-Touch Keys" (→P. 5-3)
If you press an incorrect key
(1) Press [
(2) Press [ ] to select <Yes>, and then press [OK].
* If you want to repeat the procedure from specifying the
settings for the document scanning, press [
] (Tone),
] (Reset).
] (Clear).
] (Reset).