Checking The Toner Level; Using The Toner Saver Mode - Canon imageCLASS MF4450 Basic Operation Manual

Checking the Toner Level

Keys to be used for this operation
Status Monitor/Cancel
1
Press [
2
Press [ ] or [ ] to select <Device Status>, and
then press[OK].
Status Monitor/Cancel
Device Status
Copy Job Status
Fax Job Status/Hist
Print Job Status
3
Press [ ] or [ ] to select <Toner Gauge>, and
then press[OK].
Device Status
Paper Information
Toner Gauge
Check Counter
The toner level is displayed.
Toner Gauge
OK
NOTE
Displaying the toner level
The toner level is displayed in three stages.
• <OK>
• <Low>
The message <Prepare toner cartridge.> appears in the display.
• <Nearly Out>
The message <Toner is nearly out.> appears in the display.
For details on solution, see the following.
e-Manual → Troubleshooting → Display Messages
4
Press [
<Toner Gauge> screen.
8-8
OK
] (Status Monitor/Cancel).
...
] (Status Monitor/Cancel) to close

Using the Toner Saver Mode

Set whether or not to conserve toner when copying or faxing.
NOTE
If you want to conserve toner when printing
Set to use [Toner Save] on the [Quality] tab of the printer driver.
e-Manual → Print → Printing Functions → [Quality] Sheet
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <Preferences>, and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
3
Press [ ] or [ ] to select <Toner Saver Mode>,
and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Sw
4
Press [ ] or [ ] to apply the toner saver mode to
an operation, and then press [OK].
Toner Saver Mode
Copy
Fax
5
Press [ ] or [ ] to select <Off> or <On>, and
then press [OK].
Copy
Off
On
OK
...