Table of Contents
Advertisement
48/84
Commissioning
Table 14: Residual risks for BS 2/G-250
Location
1
Conveyor medium pinch
point
2
Cross connector,
drive shaft:
between component and
workpiece pallet
3
Conveyor medium:
between running
conveyor and stationary
workpiece pallet
(e.g. during separation)
4
Between workpiece
pallets
5
End of belt section
6
Motor
2
6
5
Bosch Rexroth AG, MIT: HQ 2/G-H, BS 2/G-250, 3 842 564 989/2022-06
Situation
Hazard
Pieces of clothing or
long hair can be
pulled in
Trapping of limbs
Trapping of limbs
Body parts can be
crushed
Crushing injury to body
parts caused by falling
objects
Touching of the hot
surface (above 65 °C)
4
1
Action
Crushing,
Do not reach into the system while it is running.
Wear protective clothing.
pulling out of
hair
Shearing
Do not reach into the system while it is running.
In the work area or at transport speeds
v > -15 m
fence, is required.
Crushing
Do not reach into the system while it is running.
Crushing
Do not reach into the system while it is
running. In the work area or at transport
speeds v > 1 m
e.g. separation of the workpiece pallets,
is required.
Crushing
A constructive solution is required,
e.g. by means of a stopper.
Install appropriate guards.
Burning
Let the unit cool down for at least 30 minutes
before performing maintenance and/or
repair work.
3
/
min, a design solution, e.g. a safety
/
min , a constructive solution,
564 988-52
Advertisement
Table of Contents
