Hq 2/G-H With Bs 2/G-250, Hq 2/C-H: Replacing The Gearbox, Motor Mounting (Ma) = M (Inside) - Bosch rexroth HQ 2/G-H Assembly Instructions Manual

60/84 Maintenance and repair
Required tools
• Hex wrenches SW3, SW4.
• Hex wrenches SW8,
SW10, SW13.
Preliminary steps
Allow the belt section to
run briefly and position the
chain lock (B) on the drive
sprocket.
Make sure the system
„
is de-energized and
depressurized and
secure it against being
switched back on.
1. Only applies to
HQ 2/G-H:
Loosen the headless
setscrews of the belt
section arrester and
remove the belt section
in an upwards direction.
Bosch Rexroth AG, MIT: HQ 2/G-H, BS 2/G-250, 3 842 564 989/2022-06
10.7 HQ 2/G-H with BS 2/G-250, HQ 2/C-H: Replacing the gearbox,
motor mounting (MA) = M (inside)
HQ 2/G-H, BS 2/G-250
HQ 2/C-H
A
1
SW4
Fig. 36: Replacing the gear, motor mounting (MA) = M (using HQ 2/G-H as an example)
B
1
564 988-60