Table of Contents
Advertisement
A:
Material number
(order number)
B:
Designation
Information on the
C:
version and dimensions
5.5 Identification of the product
. . .
. . . . . . . .
Fig. 7:
Nameplate
6 Transport and storage
• Observe the transport instructions on the packaging.
• Transport weight: see delivery documents.
• Secure the product against tipping over!
• Always maintain ambient conditions during loading and transport, see page 75.
6.1 Transporting the product
Suspended loads may fall!
Falling objects can result in severe injury (or even death).
Use only slings with sufficiently high bearing loads (for product weight,
„
see delivery documents).
Make sure the lifting straps are correctly fastened before lifting the product!
„
Secure the product against tipping over when lifting!
„
Make sure that no one but the operator is in the danger zone during lifting
„
and lowering!
6.2 Storing the product
• Only set the product down on a flat surface.
• Protect the product from mechanical stress.
• Protect the product from environmental influences, such as dirt and moisture.
• Observe the ambient conditions, see page 75.
• Support the product so that suspended motors/actuators/cylinders will not
be strained.
3 842 564 989/2022-06, MIT: HQ 2/G-H, BS 2/G-250, Bosch Rexroth AG
Transport and storage
A
. . . . . . .
. . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
C
WARNING
21/84
B
554 988-18
Advertisement
Table of Contents
