Residual Risks - Bosch rexroth HQ 2/G-H Assembly Instructions Manual

Table 13: Residual risks HQ
Location
1 Entanglement zone near
drive and return unit
(reversible operation)
2 Between fastening plate
and belt section during
lifting
Between HQ drive shaft
3
and workpiece pallet
4 Between cross
connector/main section
profile and workpiece
pallet
5 Between HQ damper
and workpiece pallet
6 Between front and
back belt section
profile/stop gate pallet
and workpiece pallet
(WT moves toward
main belt)
7 Between top of HQ and
bottom of belt section
profile
8 Motor
2
1
T.R.

8.2 Residual risks

Situation Hazard
Clothing or long hair can
become entangled
Trapping of limbs
Trapping of limbs
Trapping of limbs
Touching of the hot
surface (above 65 °C)
7
8
564 988-48
4 5
564 988-50
Action
Crushing Do not reach into the system while it is running.
Pulled out hair Wear protective clothing.
Crushing Do not reach into the system while it is running.
Secure the danger zone adequately.
Shearing Danger zone is in work area or at transport
speeds v > 15 m/min hazard should be
removed with a safety measure, e.g. guards.
Shearing Danger zone must be eliminated,
e.g., by a guard.
Burning Install appropriate guards.
Let the unit cool down for at least 30 minutes
before performing maintenance and/or
repair work.
3 842 564 989/2022-06, MIT: HQ 2/G-H, BS 2/G-250, Bosch Rexroth AG
Commissioning 47/84
3
564 988-49
6
564 988-51