Cleaning The Inside Of The Machine (Bottom Plate Cleaning) - Canon PIXMA MX7600 Series Quick Start Manual

6
Repeat (4) and (6) in step 2 three times.
The paper cleans the paper feed roller as it feeds through the machine.
If the problem is not resolved after cleaning the Rear Tray, turn off the machine, unplug the
power cord, and then wipe the paper feed roller (A) located on the right side inside the Rear Tray
with a moistened cotton swab or the like. Rotate the roller (A) manually as you clean it. Do not
touch the roller with your fingers; rotate it with the cotton swab.
If the problem is still not resolved after performing the procedure above, contact your Canon
service representative.

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

This section describes how to clean the inside of the machine. If the inside of the machine
becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.
Important
Use the Rear Tray to feed paper when cleaning the bottom plate.
Do not perform any other operation while the bottom plate is being cleaned.
1
Make sure that the machine is turned on, and then remove any paper from the
Rear Tray.
2
Open the Paper Output Tray, and then open the Output Tray Extension.
(1) Press the Open button to open the Paper Output Tray.
(2) Open the Output Tray Extension.
3
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then
unfold the paper.
126 Routine Maintenance
(A)