Canon PIXMA MX7600 Series Quick Start Manual page 141

Message
"Incompatible device detected.
Remove the device."
"An unsupported USB hub is
connected. Remove the hub."
"Document in ADF. Redo operation
after checking document in ADF and
pressing OK."
"Document size is too long. Redo
operation after checking document on
ADF and pressing OK."
"Document size not suitable for two-
sided scanning. Press OK to cancel
operation and discharge document."
"This paper is not compatible with
duplex printing. Remove the paper and
press OK."
"Auto redial"
"This group dial cannot be used.
Coded dial ##"
"This group dial cannot be used.
One-touch ##"
"Hang up the phone."
"Try again in black & white."
"Failed to connect."
A communication time out occurs if an operation takes too long or if it takes
too much time to send data. This may cancel printing. In such cases,
disconnect and reconnect the USB cable.
When printing from a PictBridge compliant device, depending on the model
or brand of your device, you may have to select a PictBridge compliant print
mode on the device before connecting it to the machine. You may also have
to turn on your device or select Play mode manually after connecting the
device to the machine. Perform necessary operations before connecting your
device referring to its instruction manual.
If the error is still not resolved, check if you can print another photograph.
Check your device connected to the machine. Only PictBridge compliant
devices can be connected to the machine for direct printing. If a PictBridge
compliant device is connected via a USB hub, remove the hub and connect it
directly to the machine.
If a PictBridge compliant device is connected via a USB hub, remove the hub
and connect it directly to the machine.
The document is jammed in the ADF. Remove the document page jammed in
the ADF, then press the OK button. When the error is cleared, redo the
operation. See "Document Jams in the ADF" on page 153.
The document is too long or is jammed in the ADF. Remove the document page
jammed in the ADF, then press the OK button. When the error is cleared, make
sure that the document you are loading meets the machine's requirements
before redoing the operation. See "Original Document Requirements" on
page 16 and "Document Jams in the ADF" on page 153.
Two-sided scanning can be used only for A4 or Letter-sized documents. Press
the OK button to discharge the document, and rescan the document one side at
a time.
The Page size or Paper size setting in the printer driver is not compatible with
automatic duplex printing. Make sure that the paper size suitable for automatic
duplex printing is specified.
Load A4, B5, A5, or Letter-sized paper, then press the OK button on the
machine.
The machine is waiting to redial the recipient's number because the line was
busy or the recipient did not answer when you tried to send a document. Wait for
the machine to automatically redial the number. If you want to cancel automatic
redialing, wait until the machine starts dialing the number, then press the Stop/
Reset button. You can also delete the document from memory. See "Document
Stored in Memory" on page 95.
You selected a coded speed dial code in which a group is registered with the
Hook button pressed.
In this way, a coded speed dial code in which a group is registered cannot be
used.
* "##" represents a two-digit number.
You pressed a One-touch Speed Dial button in which a group is registered with
the Hook button pressed.
In this way, a One-touch Speed Dial button in which a group is registered
cannot be used.
* "##" represents a two-digit number.
The handset is not placed in the handset cradle correctly. Replace the handset
correctly.
The recipient's fax machine is not color-compatible. Press the Black button to
resend the faxes. Alternatively, you can set Color TX to Send in black & white.
Refer to "Color TX" in "Device Settings" of the User's Guide on-screen manual.
The telephone line cable with a modular plug is not plugged in properly, or Dial
tone detect is set to ON. Make sure that the cable is plugged in properly, and
resend the fax after a while. If you still cannot send the fax, set Dial tone detect
to OFF. Refer to "Dial tone detect" in "Device Settings" of the User's Guide on-
screen manual.
Action
Troubleshooting 137