Table of Contents
Advertisement
QUICK START GUIDE
5.
Once removed, retract the slides.
Note: The slides on the frame have a thin coating
which is used to block moisture and provide
lubrication. Use care when handling.
Slide and Secure Storage Bin Installation
1.
Insert empty storage bin frame into unit with one side
tilted slightly downward until back pin is between front
and rear rail supports.
2.
Tilt frame back to horizontal and line up 2 back pins
with rear rail support. Line up left side of frame with
rear and front rail support. Continue inserting frame
until both pins engage. The front will set down slightly
and lock into place. Repeat on right side.
Back Pin
3.
Fully extend frame, position bin over frame and lower
(rear first) into position.
Slide and Secure Storage Bins
Glass inserts are designed so bottles and cans sit flat. The
inserts may be removed when storing produce or other
items. The ridges in the bottom facilitate air flow.
Clean the storage bins with soap and water.
u-line.com
Center
the pins
Front Pin
USER GUIDE
Ice
NUGGET ICE MACHINE
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately
Ice is produced until the machine senses the bin is full.
As ice slowly melts in the bin, the level of ice drops and
ice production resumes. This ensures a constant supply
of fresh ice is always available.
The factory default ice setting is 0, which produces a
firm and compact ice nugget. U-Line's exclusive U-
Choose™ ice adjustability feature allows you five levels
of adjustment from 0 to -5. At -5 the ice is soft and
chewable.
To adjust the ice density:
1. Hold
for 5 seconds - display will flash current ice
setting
2. Adjust using
or
3. Confirm setting by pressing
28
Ice
u-line.com
3
1
/
" x
/
".
4
2
Advertisement
Table of Contents
