Brightshield™ Information; First Use - U-Line BrightShield HRE524 Quick Start Manual

QUICK START GUIDE
BrightShield™
This model includes BrightShield™ with Vyv™ Antimicrobial Light Technology.
BrightShield™
• Kills* and prevents the growth of viruses, bacteria, fungi, yeasts, mold, and mildew
• Provides continuous antimicrobial action to keep surfaces clean
• Is approved for continuous use around people, pets, & plants
• Reduces odors caused by bacteria, fungi, yeasts, mold, and mildew
• Creates a cleaner environment for food, beverages, & ice
* Testing on a non-enveloped virus (MS2 bacteriophage) showed a 97.12% reduction in controlled laboratory testing in 8 hours on hard
surfaces. Testing on SARS-CoV-2 (enveloped virus) showed a 98.45% reduction in controlled laboratory testing in 4 hours on hard surfaces.
Testing on MRSA E. coli showed 90%+ reduction in controlled laboratory testing in 24 hours on hard surfaces. Results may vary depending on
the amount of light that is reaching the surfaces in the space where the product is installed and the length of time of exposure. Use of Vyv™
Antimicrobial Light Technology is not intended to replace manual cleaning and disinfection practices.
BrightShield™ is most effective when used continuously. Your unit is factory-set to use BrightShield™ lighting
whenever the door is closed and standard bright white when the door is open. See Control Operations sections for
details and other options.
For more information about BrightShield™ visit
For more information about Vyv™ Antimicrobial Light Technology visit
USER GUIDE

First Use

First Use
REFRIGERATORS
Initial startup requires no adjustments. When plugged
in, the unit will begin operating under the factory default
settings. If the unit was turned off during installation,
simply press and the unit will immediately switch on. To
turn the unit off, press
NOTICE
Temperature displayed reflects actual
temperature inside unit.
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
www.u-line.com
.
USER GUIDE
USER GUIDE
www.vyv.tech
First Use
First Use
ICE MACHINES
Initial startup requires no adjustments. See CONTROL
Initial startup requires no adjustments. See CONTROL
OPERATION section for more details.
OPERATION section for more details.
NOTICE
NOTICE
U-Line recommends discarding the ice produced
U-Line recommends discarding the ice produced
during the first two to three hours of operation
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
to avoid possible dirt or scale that may dislodge
from the water line.
from the water line.
When plugged in, the unit will begin operating under the
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
factory default settings. If the unit was turned off during
installation, simply press
installation, simply press
switch on. To turn the unit off, press
switch on. To turn the unit off, press
25
u-line.com
u-line.com
and the unit will immediately
and the unit will immediately
and release.
and release.