Door Swing - U-Line BrightShield HRE524 Quick Start Manual

USER GUIDE
QUICK START GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Door Swing

Door Swing
UNITS WITH TOP MOUNTED HINGES
Wall
1/4" Min.
(6 mm)
90
Door Swing
Units have a zero clearance for the door to open 90°,
when installed adjacent to cabinets.
Stainless Steel and black and white models require
2-1/8" (54 mm) door clearance to accommodate the
handle if installed next to a wall.
Integrated models require 1/4" (6 mm) clearance if
installed next to a wall. Allow for additional space for any
knobs or pulls installed on the integrated panel/frame.
Wall
2-1/8" Min.
(54 mm)
90
Door Swing
USER GUIDE
Door Swing
UNITS WITH FRONT MOUNTED HINGES
For Integrated models that are installed adjacent to a
wall, 1/2" (13 mm) clearance is recommended from wall
on hinge side to allow the door to open 90°. Allow for
additional space for any knobs or pulls installed on the
integrated panel/frame.
Stainless Steel models that are installed adjacent to a
wall require 2-1/4" (57 mm) door clearance on hinge side
to allow for door handle.
Units have a zero clearance when installed adjacent to
cabinets.
Integrated
1/2" (13 mm)
90°
Door Swing
Space Required
For any Knobs or Pulls
10
Door Swing
u-line.com
u-line.com
Solid
Wall
2-1/4" MIN
(57 mm MIN)
90°
Door Swing
Door Swing 1
Wall