Specifications; Appendix; Verifying The Connection Between Gv-Fr Panel And Gv-As Controller - GeoVision GV-FR User Manual

Specifications

For details, see the datasheet.

Appendix

Verifying the Connection between GV-FR Panel and GV-AS
Controller
To verify if GV-FR Panel is connected to GV-AS Controller successfully, go to the Web
interface of the GV-AS Controller (Extended Device > Extended Reader Configuration), as
exemplified below, and check the following settings:
⚫
The Virtual MAC of the GV-FR Panel should be listed under Serial Number of the GV-
Reader/CR420/GF1921/GF1922 Function.
⚫ The door corresponding to the GV-FR Panel should be selected under Function.
⚫ The RS-485 checkbox should not be selected.
45