Chapter 4 User Management On Gv-Asmanager And; Gv-Fr Panel - GeoVision GV-FR User Manual

Chapter 4 User Management on GV-
ASManager and GV-FR Panel
Once you have set up the connections among GV-FR Panel, GV-AS Controller and GV-
ASManager software, you can begin to create and manage users on GV-ASManager and

GV-FR Panel.

Setup Prerequisite:
Before enrolling face photos in GV-ASManager, you need to have completed the following
settings on GV-ASManager:
•
Cards added
•
Users added with Cards assigned
For details, see 4.3 Setting Cards and 4.6 Setting Users respectively in GV-ASManager
User's Manual.
Follow the three steps below to enroll face photos in GV-ASManager and sync the user data
to GV-FR Panel:
Add User Faces and Cards on GV-ASManager
4.1 Adding User Faces & Cards on GV-ASManager
Upload User Data to GV-FR Panel
4.2 Uploading to GV-FR Panel
Use GV-FR Panel For Access Control
Authenticate access by three modes: Face Only, Card or Face
Card, Card + Face
4.3 Using GV-FR Panel
User Management on GV-ASManager & GV-FR Panel
4
20