Table of Contents
Advertisement
Upon first-time starting GV-FR Panel, users are prompted to set the login password for its
Administrator account. After the password is set, the live view of the GV-FR Panel's built-in
camera appears. For details, see Chapter 2 Getting Started.
1.6 Standard Installation
For installing GV-FR Panel on a wall, follow the steps below.
1.
Place the mounting bracket on the wall and mark the locations of the 4 screw positions
as illustrated below.
2.
At each of the 4 screw positions marked on the wall, drill a hole slightly smaller than the
plastic screw anchors provided.
3.
Insert the 4 plastic screw anchors into the holes drilled and secure the mounting bracket
onto the wall with the screws provided.
4.
Secure the large sealing rubber and the back cover onto the back of the GV-FR Panel
with the screws provided.
Sealing Rubber
Note: Thread the necessary cables through the back cover and connect them to the panel
before securing the cover.
7
Facing the side to the groud
Back Cover
Advertisement
Table of Contents
