National Instruments PXIe-4162 Manual page 15

Software Location
NI-DCPower LabVIEW—Available on the LabVIEW Functions
Instrument Driver
palette at Measurement I/O » NI-DCPower.
Examples are available from the Start menu in the
National Instruments folder.
LabVIEW NXG—Available from the diagram at
Hardware Interfaces » Electronic Test » NI-
DCPower. Examples are available from the
Learning tab in the Examples » Hardware Input and
Output folder.
LabWindows/CVI—Available at Program Files » IVI
Foundation » IVI » Drivers » NI-DCPower.
LabWindows/CVI examples are available from the
Start menu in the National Instruments folder.
C/C++—Available at Program Files » IVI
Foundation » IVI. Refer to the Creating an
Application with NI-DCPower in Microsoft Visual
C and C++ topic of the
SMUs Help
and library files to your project. NI-DCPower does
not ship with installed C/C++ examples.
From the Windows start menu, select
■
National Instruments » [Driver] Soft Front
Panel. This launches InstrumentStudio and
runs a soft front panel populated with
NI-DCPower devices.
From the Windows start menu, select
■
National Instruments » InstrumentStudio
2018. This launches InstrumentStudio and
runs a soft front panel populated with
devices detected on your system.
From Measurement & Automation
■
Explorer (MAX), select a device and then
click Test Panels.... This launches
InstrumentStudio and runs a soft front panel
for the device you selected.
NI DC Power Supplies and
to manually add all required include
PXIe-4162
Description
interactive measurements
on several different
device types in a single
program.
The NI-DCPower API
configures and operates
the module hardware and
performs basic
acquisition and
measurement functions.
© National Instruments
15