Table of Contents
Advertisement
Quick Links
USER GUIDE
PXIe-416x Noise Filter
Accessory
Noise Filter Accessory for the PXIe-4162/PXIe-4163
This document explains how to install and use the PXIe-416x Noise Filter Accessory with a
PXIe-4162/PXIe-4163 source measure unit (SMU)-collectively referred to as the PXIe-416x
-and includes PXIe-416x Noise Filter Accessory specifications.
Read this document and the documents listed in the Additional Resources section about
installation, configuration, and operation of this product before you install, configure, operate,
or maintain this product. Users are required to familiarize themselves with installation and
wiring instructions in addition to requirements of all applicable codes, laws, and standards.
The PXIe-416x Noise Filter Accessory is used to modify the behavior of the
PXIe-4162/PXIe-4163 SMU when the module is used in remote sense mode.
Caution
the product in a manner not specified can damage the product and compromise the
built-in safety protection.
Attention
documentation d'utilisation. L'utilisation du produit de toute autre façon que celle
spécifiée risque de l'endommager et de compromettre la protection de sécurité
intégrée.
Notice
This device is intended for use only with the PXIe-4162/PXIe-4163 SMU.
For more information about the PXIe-4162/PXIe-4163, refer to ni.com/manuals.
Contents
Icons.......................................................................................................................................... 2
Getting Started with the PXIe-4162/4163 Noise Filter Accessory........................................... 2
Kit Contents and Other Equipment................................................................................... 2
Installing the PXIe-416x Noise Filter Accessory............................................................. 2
PXIe-416x Noise Filter Accessory Specifications....................................................................5
Definitions.........................................................................................................................6
Derating.............................................................................................................................6
Physical............................................................................................................................. 6
Observe all instructions and cautions in the user documentation. Using
Suivez toutes les instructions et respectez toutes les mises en garde de la
Advertisement
Table of Contents
Related Manuals for National Instruments PXIe-416 Series
Summary of Contents for National Instruments PXIe-416 Series
-
Page 1: Table Of Contents
USER GUIDE PXIe-416x Noise Filter Accessory Noise Filter Accessory for the PXIe-4162/PXIe-4163 This document explains how to install and use the PXIe-416x Noise Filter Accessory with a PXIe-4162/PXIe-4163 source measure unit (SMU)—collectively referred to as the PXIe-416x —and includes PXIe-416x Noise Filter Accessory specifications. Read this document and the documents listed in the Additional Resources section about installation, configuration, and operation of this product before you install, configure, operate, or maintain this product. -
Page 2: Icons
Environmental Guidelines....................6 Compliance and Standards....................7 Additional Resources........................ 8 NI Services..........................9 Icons Notice Take precautions to avoid data loss, loss of signal integrity, degradation of performance, or damage to the model. Caution Take precautions to avoid injury. Consult the model documentation for cautionary statements when you see this icon printed on the model. - Page 3 Accessory. Refer to your cable or accessory documentation for more information. Refer to the following pinouts for your respective module to make the appropriate connections for your application. PXIe-416x Noise Filter Accessory User Guide | © National Instruments Corporation | 3...
- Page 4 Figure 2. PXIe-4162 Pinout Calibration HI CH0 Guard CH0 Output HI CH1 Output HI CH0 Sense LO CH0 Sense HI CH1 Sense HI CH2 Guard CH1 Guard CH2 Output HI CH2 Sense LO CH1 Sense LO CH2 Sense HI CH3 Guard CH3 Output HI CH4 Output HI CH3 Sense LO...
-
Page 5: Pxie-416X Noise Filter Accessory Specifications
The PXIe-4162 is a 12-Channel, ±24 V, 100 mA SMU, and the PXIe-4163 is a 24-Channel, ±24 V, 50 mA SMU. Refer to the module specifications at ni.com/manuals more information. PXIe-416x Noise Filter Accessory User Guide | © National Instruments Corporation | 5... -
Page 6: Definitions
Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty. •... -
Page 7: Compliance And Standards
Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve. PXIe-416x Noise Filter Accessory User Guide | © National Instruments Corporation | 7... -
Page 8: Additional Resources
CE Compliance This product meets the essential requirements of applicable European Directives, as follows: • 2011/65/EU; Restriction of Hazardous Substances (RoHS) Export Compliance This product is subject to control under the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) administered by the U.S. Department of Commerce's Bureau of Industry and Security (BIS) (www.bis.doc.gov) and other applicable U.S. -
Page 9: Ni Services
NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI. NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA. PXIe-416x Noise Filter Accessory User Guide | © National Instruments Corporation | 9... - Page 10 NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the file on your media, or the National Instruments Patent Notice at . You can find patents.txt ni.com/patents...
Need help?
Do you have a question about the PXIe-416 Series and is the answer not in the manual?
Questions and answers