Programmable Keys - Line Key - Yealink T54W End User Manual

AireSpring
End User Guide for Yealink T54W
Programmable keys – Line key
The Line Keys capabilities
In this section you will have additional options to configure up to 16 keys:
Line – assign a specific account registered from the phone to a key
f
Directed Pickup – Call Pickup to a specific extension
f
Directory – access the phones local directory
f
DND – do not disturb
f
Enhanced Call Park – configures a key to park in a specific orbit.
f
Enhanced Monitor Extension – it allows you to monitor another line.
f
Group Pickup – this configures the key as a speed dial for the Group Pickup service.
f
Hold – this is used to place a call on hold.
f
Intercom/PTT – intercom to a specific extension
f
Last caller ID erasure – deleted the last CallerID of who called the phone
f
Paging List – access subscribed Paging groups for transmission
f
Park Call – this is used to park calls. Note to set the park code to *53
f
Retrieve Parked call – retrieve a parked call from a specified orbit. Note to change the
f
retrieve code to *54
Speed Dial – this configures the key as a speed dial.
f
Transfer – this is used to transfer calls.
f
VoiceMail – this configures the key as a speed dial to access Voicemail. An alternative to using
f
the envelope button.
Freely Retrieve Park Call – this is used to retrieve parked calls when no specific Call Park orbit
f
is programmed, the user will be asked for the orbit number.
Logout – used for hotdesking/hoteling.
f
Custom key – programable key for set functions that are not part of the standard
f
configuration. Please contact Airespring if you are interested in a specific function to be
programmed.
5